Why can't the protective film of aluminum gusset plates be peeled off casually?
Aluminum gussets will inevitably be bumped during transportation. In order to avoid damaging the aluminum gusset plate, a protective film needs to be applied to the surface of the aluminum gusset plate. But during the installation process, people don't know whether the protective film needs to be removed, which will affect the beauty of the decoration, and they are afraid of damaging the surface of the aluminum gusset plate.
So I put forward my own opinions on this multiple choice question. The editor believes that the protective film should be removed before installing the aluminum gusset plate. Of course not tear it off blindly, but when you need it. Although it will take a little more time, it is guaranteed not to be extravagant and wasteful. Because under normal circumstances, two aluminum gusset plates are reserved in the prediction area, mainly because there are defective NG plates in the square aluminum gusset plates, which facilitates timely replacement. And even if there are excess aluminum gussets left, if a small amount needs to be replaced in the future, they can be replaced in time without the need to order and purchase, which saves a lot of time.
During the process of tearing off the film, be sure to wear gloves and handle them with care. Only by taking better protection measures can aluminum gusset decoration show its best side.
Because aluminum suspended ceilings can better meet customers' pursuit of fashion and beauty than ordinary aluminum veneers, because the size, color, and specification spacing can be customized according to customer requirements, but you need to pay attention when purchasing aluminum suspended ceilings. what?
What should you pay attention to when choosing to buy aluminum ceilings in Henan?
1. Domestic aluminum plates produced by large companies have their own brand protective films. There is only a transparent white protective film on the surface of the branded aluminum plates. It can be concluded that they are not big brands or even inferior products.
2. In order to avoid keel ceilings from different manufacturers, the installation accuracy will be affected. All large plate structures have different self-supporting keels, and each decorative plate keel, hanger, square aluminum plate, pressure plate has indelible marks on the bottom or edge.
3. To judge the quality of aluminum plates, it does not mean that the thicker the aluminum plates, the better. Inferior aluminum gussets are usually used to make plastic films on aluminum substrates and aluminum gussets. Usually, the method of reducing the thickness of the aluminum pad is used to coat the aluminum pad with a thick film. If the film is too thin, the performance of the aluminum gusset plate will be reduced.
4. During the coating process, mainly observe the ceiling, and the coating surface of the film should be as bright as possible. Usually good-quality films are fine and reflective, and will not wrinkle or change color after long-term use.
5. Keel materials are generally divided into aluminum, iron and fingerprint-free steel. Aluminum keels will not rust, but because of their high cost, sales are few. Iron keels are prone to rust. Although the keel connection is hidden behind the suspended ceiling, if rust spots are scattered on the suspended ceiling, it will be detrimental to the suspended ceiling and affect the stability of the suspended ceiling for a long time.
