Chongqing aluminum veneer manufacturer explains the thickness of aluminum veneer!

Aluminum veneer manufacturers have found that when choosing aluminum veneers, many consumers always ask the manufacturer whether it is better to be thinner or thicker. When choosing the thickness of the aluminum veneer, you must of course refer to how consumers use the aluminum veneer.

When purchasing aluminum veneers for curtain walls, you must pay attention to the thickness selection range. The thickness of aluminum veneer is generally between 0.6 mm and 5 mm. For the exterior wall construction of our home, it is particularly important to choose aluminum veneer for the exterior wall.

Generally speaking, the thickness of our roof panels is above 0.8 mm. For curtain wall aluminum veneers with a thickness less than 0.8 mm, there is no guarantee in terms of service life and safety, because a little heavy rain during the summer thunderstorm season is fatal to curtain wall aluminum veneers that are too thin.

Take this typhoon as an example. Many customers' roof curtain wall aluminum veneers were damaged. Aluminum veneer manufacturers have found that many damaged flame-retardant curtain wall aluminum veneers are less than 1 mm thick, which also shows that in fact, when natural disasters occur, the thickness of aluminum veneers can also play a certain role.

So hopefully you choose very thin sheets that won't require cheap spray paint. Instead, choose the aluminum veneer that suits your manufacturer.

Generally, when using aluminum veneer as a wall panel, don't be too particular about the thickness of the board, because there is still an external wall blocking it. At this time, you need to consider more about the application of the aluminum veneer effect, such as measuring the width of the wall, so that you can better select the width of the aluminum veneer and make it more beautiful. Only when it is beautiful and practical can more people choose aluminum veneers.