Aluminum square tube is one of the emerging ceiling materials in recent years. It is molded from aluminum material and surface treated. Aluminum square tubes have bright and elegant lines, with appropriate heights and appropriate viewing angles. They have fewer maintenance restrictions, allowing the design to be varied and the entire building space to be wide and transparent. Aluminum square tube ceilings are a decorative curtain-type suspended ceiling. The lines are bright and elegant, the whole is transparent, peaceful and rich in color. Choosing an appropriate height and appropriate visual angle can produce a curtain effect, making the design ever-changing and beautiful.
Product Parameter
Commonly used specifications and models are: 30X50mm, 30X80mm, 30X100mm, 40X60mm, 40X80mm, 40X100mm, 40X120mm, 50X50mm, 50X80mm, 50X100mm, 50X120mm, 50X150mm, etc. In reality, aluminum square tubes come in a variety of specifications, usually with a bottom width of 20-400 mm, a height of 20-600 mm, a thickness of 0.4-3.5 mm, and a length of up to 6 meters, which can be customized at will. Special sizes can be customized and processed. Relevant high-quality companies in this industry can do it in terms of machinery, equipment and technology.
Product construction process
1. Install aluminum trimming corners according to the same level.
2. Hoist the boom and light steel keel according to the required spacing. Note that the distance between the booms is less than or equal to 1.2m, and the spacing between the light steel keels should be 1.2m. Connect the hanging parts preinstalled on the triangular keel to the triangular keel and light steel keel in a vertical direction according to the spacing between the plates, and then adjust the horizontal line.
3. After adjusting the level, press the two sides of the square plate paralleled into the triangular keel seam. First install the corners at both ends in the horizontal direction, then straighten the straight lines and gradually buckle the pressed materials row by row.
4. Adjust once after each row is buckled. Make sure the board surface is flat and the board seams are vertical
5. Wear gloves when installing the aluminum square tube gusset plate, and it is prohibited to tear off the protective film of the aluminum square tube.
Note: The direction of the small pits on the edge of the square plate is inserted into the seam of the triangular keel.
Hot Tags: 7050 aluminium rectangular tube, China 7050 aluminium rectangular tube manufacturers, suppliers, factory, 6063 T52 Aluminum Square Tube, 7050 Aluminium Rectangular Tube, Rectangle 6061 Aluminium Tubes, Aluminium Rectangular Box Section and Tube, 6061 T6 Aluminum Rectangular Tubing, 6063 T52 Aluminum Rectangular Tube
